![]() The first step when setting up a slicer is to select what filament and printer you will be using. Towards the end of the blog, I will go into a certain settings in a bit more depth as they can also be useful for new Makers. This is a good starting point for new Makers. This will give you access to the most minimal settings you need to get printing. If PrusaSlicer is not in simple mode, then please select it by clicking the simple tab on the top right. Please Note: For the purpose of this post, we will be using PrusaSlicer 2.4.2 running on a Windows 10 PC.įor this post we will have the user interface set to simple. So now that we have explained what a slicer is be sure to download PrusaSlicer before you continue. Learning to properly use a slicer can mean the difference between a successful print and a pile of spaghetti. A slicer is software that takes your 3D model, allows you to adjust various settings, and then converts it to a gcode file that contains all the information your printer needs to produce the model. For this to happen the 3D Printer needs to know all the information relating to each layer of the print. The process of FDM 3D Printing involves placing layers of melted plastic on top of each other to form the model. While we have explained what a slicer is in The Very Basics of Cura post we want to explain it again for new readers. While PrusaSlicer has started to include resin slicing you may still need to use dedicated slicers such as Lychee or Chitubox What is a 3D Printing Slicer? PrusaSlicer can help you get printing with minimal effort. ![]() The reason we chose PrusaSlicer is due to it being free, having a passionate community, receiving frequent updates, boasting powerful features, and starting to integrate resin slicing. ![]() By writing this blog, we hope to help new curious Makers understand the very basics of PrusaSlicer and what it offers so that you have all the resources you need when choosing your slicer software. ![]() PrusaSlicer is another notable slicer that is rapidly growing in popularity. Cura is the friendly face of slicing software that needs no introduction in the Maker community, and although it might be the only slicer you will ever need, it is not the only slicer available. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |